When your FB200 or FB300 controller is in Access Point mode the following is displayed:

Wifi Mode - Access Point

AP Name (SSID) FB-#####

The FB400 is in Access Point (AP) Mode when the LED light is blinking slowly.

Open the Flame Boss® app on your phone and make sure you are logged in by going to the "Account" tab. If logged in your Username, Email and Temperature Scale will be displayed. Next, go to the "Controllers" tab and click the "Add Controller" link in the middle. Enter the serial number from the label on the back of the control and follow the step-by-step directions.

NOTE: In order to add a controller to your MyFlameBoss account you need to connect to your local WiFi first to obtain the required device PIN. 

If you need further assistance, please click here to Contact Us or call us at 800-978-9078.